J-FIX POLYESTER STYRENE FREE RESIN 150ml

Drill correct diameter hole to corresponding depth.

Clean hole by brushing, blowing to remove drilling debris and dust:
2×Blowing 2×Brushing 2×Blowing 2×Brushing 2×Blowing.

Attach nozzle to cartridge.
Extrude first part to waste until an even colour is achieved.
Fill hole 1/3 to 1/2 full starting from the bottom of the hole.

Insert stud into base material by hand using a twisting motion.

Allow resin to cure.
Attach fixture.
Tighten with torque wrench to
recommended torque.